Shopping Cart: (0) Item

Additional Images:

  • Sun System™ Complete Fresca Sol Light System, Water Cooled Reflector

Sun System™ Complete Fresca Sol Light System, Water Cooled Reflector

sku # 904590
Our Price: $247.99
Quantity
Complete Fresca Sol Light System

This system of a double wall glass vessel with brackets, socket and 15 foot Sun System™ lamp cord.

Water-Cooled vs. Air-Cooled? Air-cooled lights work great with cool air, but become less efficient when outside air temperatures become worriers.

The Fresco Sol Water-Cooled Light Fixture keeps your room cool all year long and is more energy efficient to run. It takes a lot less energy to cool your lighting fixture with water than with air, therefore lowering your electric bills.

• Water-cooling allows placement of lighting as close as 6" above plants instead of 18" to 24" with air-cooled systems - resulting in 9 to 16 times more light for your plants!

• Made with high-temperature borosilicate glass

• Easy to access door with thumbscrews allows for easy lamp replacement

• Universal hanging bracket allows attachment of 2 optional reflectors

• Accommodates 250, 400, 600, or 1000 HPS lamps. 250 or 400 MH lamps-tubular jacket only (no BT-37 or 56 lamps)

• ATTENTION: Minimum 50-gallon reservoir needed per 1000-Watt fixture - Smaller reservoir can be used as a chiller or heat exchange

• Requires active cooling with a water pump, not included.

NOTE: This Product is OVERSIZED - Average shipping cost varies, and you will be notified of additional shipping charges before processing.
Please feel free to call us at 1.866.803.2100 should you have any questions regarding your order.


Alternate Brands
Height 4.5"
Length 19.75"
Width 14.25" w/ wing

You May Also Like:

Product Questions & Answers

Q) re: Fresca Sol Water Cooled Fixture I really like this product. I have used it for over a year with no problems. But I now have deposits built up on the gaskets at the ends. I have it full of vinager and water to soak overnight, but I am concerned the pieces that flake off might not fit though the slots in the gasket. Ergo, I believe I need to dismantle this fixture. I looked everywhere for a manual and could not find one. Is there a safe and/or easy procedure to remove the ends, and then reinstall them after cleaning? The seals are so tight, I'm not sure what to do to separate the pieces. Thank you in advance for any assistance or information you can provide me.
A) We would suggest this link: http://www.bestcoastgrowers.com/troubleshooting-and-maintenance/index.php This is the direct link to the manufacture's maintenance page. :)

Have a question? click here to ask us.

Shop By Brand

Sign Up for
HydroWholesale Emails






Download a 2012-13 Catalog.