The Lighthanger is the easiest, most efficient hanger on the market. No more doing the light limbo struggling with chains to get the perfect mounting height. The Lighthanger maximizes every available lumen by enabling you to adjust the mounting height of your reflector easily and accurately, a daily event for many growers.

The Lighthanger works using a dual pulley system which accommodates adjusting the height of both mounting hooks independently for reflectors whose center of gravity is offset by the weight of the socket assembly. The Lighthanger can be adjusted simply by pulling the cords together or independently to raise or lower the light as needed. Make sure the locking pin is in place and the fixture is stable when adjusting the Lighthanger. * Be sure to adjust cords with the label facing towards you. The cords are twenty-five feet long, allowing for adjustment without disturbing your plants in the process. Always inspect cords for wear and tear and replace the cords and/or Lighthanger at the first signs of wear. 

Recommended for remote ballast fixtures only. Assembly hardware and easy-to-follow instructions are included. The Lighthanger comes with mounting hardware and pre-assembled cords. With the hardware, simply mount the unit using the pre-drilled holes.  Be sure to mount the Lighthanger to a firm structural support!

The maximum weight that the 26" Lighthanger will support is 30 pounds.  Do not exceed the maximum weight guidelines, or failure of the unit may result.

The Lighthanger 26” is 26” long x 1.25” wide x .75” deep.
The Lighthanger 36” is 36” long x 1.25” wide x .75” deep.